On Gate Swing Operators

Swing Gates

FAAC provide a wide variety of Swing Gates Automation systems, our swing gates products are the perfect solution for electric swing gates and range from operators that are suited to small pedestrian gates, right up to operators suited for commercial heavy duty applications on gates up to 7m per leaf.

On Gate Swing Automation

Our on gate swing automation products can be electro-mechanical or hydraulic, which can be mounted on to the gate. On Gate swing automation adds security, convenience and safety to gates, this means of access control means that gates can be opened remotely adding to convenience.

	390 SWINGING GATES OPERATOR The ideal choice for large pillars. The FAAC 390 electro-mechanical actuator is the most practical and economic choice for automating gates on large pillars. Electronic Safety - Anti-crushing protection is ensured by an electronic device installed on the FAAC control boards, which directly controls drive torque. In case of an emergency, the release key makes it possible to operate the gate manually. Less maintenance, highly reliable the FAAC 390 electro-mechanical device cuts down considerably on maintenance. Reliability is assured under all atmospheric conditions and in an outdoor temperature range of -20oC to +55oC.
	391 SWINGING GATES OPERATOR 24V Easy set up procedure - The 391 operator is available in master and slave versions. The 391 E has an integrated electronic control board and the standard 391 is the slave. It’s easy to install compared to linear types and has an easy set up procedure. The FAAC 391 electro-mechanical actuator is a practical and economic choice for automating gates on narrow pillars. It has a good aesthetical design, and is compact with the control board built-in. Anti-crushing protection is ensured by an electronic device installed on the FAAC control board, which directly controls drive torque. . The FAAC 391 electro-mechanical device cuts down considerably on maintenance.
	400 SWINGING GATES OPERATOR For gates up to 7 metres per leaf. For large residential and industrial swing-leaf gates A range of 7 different operators, with or without hydraulic locking The exclusive hydraulic device, ensuring maximum anti-crushing protection, features two highly sensitive by pass valves. The hydraulic locking system will hold the gates open and closed at the end of the operating cycle. The motor unit is contained in a compact hydraulic enbloc housing. All components are oil-bath lubricated and continuously cooled, require very little maintenance, and are low on electrical power consumption. Precision mechanics and the use of hydraulic oil as motor fluid are the secrets behind the extremely quiet movement. Reliability is assured under any atmospheric conditions and at extreme temperatures in the range of -40oC to +55oC.
	402 SWINGING GATES OPERATOR For residential swing gates with single leaf of 1.8m (402 CBC/SB) and 3m (402 SBS) The hydraulic system ideal for residential gates The FAAC 402 system is a practical and economic choice for residential gates of up to 1.8 metres in length per leaf. The FAAC 402 hydraulic device requires little maintenance and is low on electrical power consumption. The exclusive hydraulic device, ensuring maximum anti-crushing protection, features two highly sensitive by-pass valves. In case of an emergency, the release key makes it possible to operate the gate manually. Few components and the use of hydraulic oil as motor fluid are the secrets to ensuring very quiet movement and reliability under all atmospheric conditions and in an outdoor temperature range of -40oC to + 55oC. Thanks to its compact size the FAAC 402 can be installed even when space is at a premium. On top of the undisputed advantages of FAAC’s hydraulic system, there is also a corrosion proof coating highly resistant to atmospheric agents providing long-life.
	412 24 V SWINGING GATES OPERATOR The ideal choice for residential gates For gates up to 1.8 metres in length per leaf. The 412 24V actuator is non-reversing, therefore it is self locking in open and closed positions. No need for expensive modifications to the existing load bearing structure. Use of electro-mechanical technology makes the FAAC 412 24V ideal for light duty applications. Anti-crushing protection is ensured by an electronic device installed on the FAAC control boards, which directly control the operator torque. In case of emergency, the release key makes it possible to operate the gate manually. The FAAC 412 24V electro-mechanical device cuts down considerably on maintenance. Reliability is assured under all atmospheric conditions and in an outdoor temperature range of -20oC to +55oC.
	412 SWINGING GATES OPERATOR For residential swing gates with single leaf length of 1.8m The 412 actuator is non-reversing, so it is self locking in open and closed positions. Quick and easy to install, there is no need for expensive modifications to the existing load bearing structure. Use of electro-mechanical technology makes the FAAC 412 ideal for light duty applications. Anti-crushing protection is ensured by an electronic device installed on the FAAC control boards, which directly control the operator torque. In case of emergency, the release key makes it possible to operate the gate manually. The FAAC 412 electro-mechanical device cuts down considerably on maintenance. Reliability is assured under all atmospheric conditions and in an outdoor temperature range of -20oC to +55oC.
	413 24V SWINGING GATES OPERATOR 24V operator For swing gates with single leaf length of 1.8m (2.5m with electric lock). The 413 is an energy efficient motor which is highly adjustable to allow maximum flexibility in installation dimensions. There are 4 versions available. The LS versions are equipped with open and closed limit switches to ensure the gate opens whatever the weather. All versions have a built in opening and closing mechanical stop. There are several different versions of the operator, some with limit switches and some without allowing you to choose the most suitable for your requirements. The non-reversing system ensures the gate is mechanically locked when the motor is not running. A convenient and secure release system with customised key (numbered locks from 1-36) makes it possible to manually move the gate in event of power failure. The 24Vdc power supplied guarantees the highest security.
	413 SWINGING GATES OPERATOR For swing gates with single leaf length of 1.8m (2.5m with electric lock) There are 4 versions available. The 413 is an energy efficient motor which is highly adjustable to allow maximum flexibility in installation dimensions. The LS versions are equipped with open and closed limit switches to manage slowdown and stopping points. All versions have a built in opening and closing mechanical stop. There are several different versions of the operator, some with limit switches and some without allowing you to choose the most suitable for your requirements. The non reversing system ensures the gate is mechanically locked when the motor is not running. A convenient and secure release system with customised key (numbered locks form 1-36) makes it possible to manually move the gate in event of power failure. The Aluminium body is completely double.coated, guaranteeing a high resistance to atmospheric agents predisposition for the use of the ”gatecoder” deceleration kit.
	415 24 V SWINGING GATES OPERATOR For swing gates with single leaf max length of 3m (415) and 4m (415L) The 415 operator is available in 8 different versions. The LS versions are equipped with open and closing Limit switches to manage slowdown and stopping points. The Limit switch can be used as a stop or slowdown command. The high precision micrometric limit switches allow frontal adjustment. Mechanical stops are not fitted to the units. The non reversing system ensures the gate is mechanically locked when the motor is not running. A convenient and secure release system with customised key (numbered locks from 1-36) makes it possible to manually move the gate in event of power failure. The 24Vdc power supplied guarantees the highest security. The Aluminium body is completely double.coated, guaranteeing a high resistance to atmospheric agents predisposition for the use of the ”gatecoder” deceleration kit. A horizontal cable exit is useful for installations near to the ground. There is also an optional rod protective housing, which is available for the 300mm models.
	415 SWINGING GATES OPERATOR For swing gates with single leaf max length of 3m (415) and 4m (415L) The 415 operator is available in 8 different versions. The LS versions are equipped with open and closing Limit switches to manage slowdown and stopping points. The Limit switch can be used as a stop or slowdown command. The high precision micrometric limit switches allow frontal adjustment. Mechanical stops are not fitted to the units. The non-reversing system ensures the gate is mechanically locked when the motor is not running. A convenient and secure release system with customised key (numbered locks from 1-36) makes it possible to manually move the gate in event of power failure. The Aluminium body is completely double coated, guaranteeing a high resistance to atmospheric agents predisposition for the use of the ”gatecoder” deceleration kit. A horizontal cable exit is useful for installations near to the ground. There is also an optional rod protective housing which is available for the 300mm models
	422 PED SWINGING GATES OPERATOR For pedestrian gates from 0.80m to 1.2m per leaf The wide range with or without hydraulic locking for pedestrian gates The exclusive hydraulic device, ensuring maximum anti-crushing protection, features two highly sensitive by-pass valves. In case of an emergency, the customised release key and a special ergonomic release make it possible to operate the gate manually. Few components and the use of hydraulic oil as motor fluid are the secrets ensuring very quiet movement and reliability under all atmospheric conditions and in an outdoor temperature range of -40oC to +55oC. On top of the undisputed advantages of FAAC’s hydraulic systems, there is also corrosion proof coating highly resistant to atmospheric agents providing long life.
	422 SWINGING GATES OPERATOR For residential and commercial swing gates from 1.2m up to 3m per leaf The exclusive hydraulic device, ensuring maximum anti-crushing protection, features two highly sensitive by-pass valves. In case of an emergency, the customised release key and a special ergonomic release make it possible to operate the gate manually. few components and the use of hydraulic oil as motor fluid are the secrets to ensure quiet movement and reliability There is also corosion proof coating which is highly resistant to atmospheric agents providing long life.
	S418 SWINGING GATES OPERATOR New 24V electro-mechanical operator. For single leaf up to 2.7m (2.3m without electric lock) integrated mechanical stops residential use With an adaptable rear bracket requiring no welding, allowing great flexibility in mounting to the gate pier. It can operate gates up to 2.3m wide per leaf (2.7m with electric lock). There are in built mechanical stops, so no need to install external stops. The operator has a long stroke, 350mm as standard but 390mm without stops; this makes it more adaptable to various pillar dimensions. A fast opening and closing speed. A Max. rod speed of 1.8cm per second, which gives an angular rotation speed of 4.9o per second. This is the first unit of its type to come with a protective sheath over the worm screw for additional safety. IP54 rated